1035 Carbon Steel Round Bars Steel Billet High Carbon Steel Round
Bar Billet
Grade 1035 is a standard carbon steel grade for 1035 steel bar as
well as wire rod.
1035 round bar may also appear as:
SAE (Society of Automotive Engineers)
SAE 1035 steel bar
AISI (American Iron and Steel Institute)
AISI 1035 round bar
1035 steel bar is most commonly characterized as a medium carbon
grade, and as such is a popular “work horse” grade of steel.
1035 steel bar is often supplied in hot rolled, cold drawn, turned
& polished, annealed and or coated conditions; both in bar lengths
or packaged into wire rod.
1035 steel bar is a relatively low cost, medium strength steel and
is common in a wide variety of general purpose applications. 1035
round bar is higher in strength and hardness than low carbon steel
and is often used for small parts of moderate strength such as
bolts, nuts, studs and parts which are headed or upset.
A common length for 1035 steel bar is 20′, although many mills have
the capacity to produce a variety of lengths depending on the
diameter and also the end application. 1035 may also be supplied in
wire rod form. Typical wire rod size is around 4,000 #. In coil
form, it may be packed into a tightly banded coil or can be loaded
onto a carrier depending on the customer’s preference
Applications
1035 round bar and wire rod may be used for cold heading / working
into fasteners such as screws, bolts and nuts, machined into cold
finished components, and/or hot or cold forged into a variety of
parts. Depending on the application, it may be rolled into a wide
range of diameters. By cold drawing 1035 round bar, it will
increase the mechanical properties, improve the size tolerance and
enhance the surface. In these conditions, 1035 steel bar may be
used in a variety of tools, chain pins, sealing rings, nails,
couplings, levers, studs, gears, bolts, rods, pins as well other
numerous other types of parts.
Ordering Information for 1035 Steel Round Bars
| Grade | SAE 1035 |
| Order | Minimum order 3MT per size |
| Length | a) 1 To 12 Meters
b) Custom Cut Length or multiple |
| Round Diameter | 23.5 mm to 80 mm |
| Hexagon | 23.5mm to 52.5mm |
| Condition | a) Hot Rolled b) Bright Bar c) Cold Drawn & Polished |
SAE 1035 Carbon Steel Round Bars Chemical Composition
Grade | Chemical composition %: |
| C | Si | Mn | S | P | Cr | Ni | Cu |
| C35 | 0.17-0.24 | 0.17-0.37 | 0.7-1.00 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.25 | ≤0.25 |
SAE 1035 Carbon Steel Round Bar Physical Properties
| Physical Properties | Metric | Imperial |
| Density | 7.85 g/cm3 | 0.284 lb/in3 |
SAE 1035 Carbon Steel Round Bar Mechanical Properties
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation in 100-150 mm(%) | Reduction in Area | Hardness |
| 1020 | ≥380 | ≥210 | ≥25 | ≥50 | ≤111HB |
1. How long will it take to execute my order?
Our normal produce time is 7-15 working days.but we have many
models in stock.
2. How much will the shipping cost be?
This will depend on the size and weight of your order and the
method of shipping.
3. Do you provide samples?
Yes, we can provide samples . We can send the samples by TNT,DHL,
FEDEX, EMS, UPS or to your warehouse
4. Do you have products in stock?
There are 600 tons stock for various size .pls kindly inform us
what model you need , we will send stock details to you .
5. Can I visit you?
Sure, Pls let us know if you have a plan to visit our company, we
will arrange it for you.
